Come with me inside RA Audio studios as we set up a Taylor Guitar’s K4 EQ. Here’s an outtake from the recording of my upcoming single called “Till We Meet Again” as Robert Navarro and I go through the pre-production of my Taylor 615ce. The amazing thing is that it didn’t take a very long time to plug in the guitar, plug in the K4, wire it to the pre-amp. Of course Robert and I spent a bit of time listening to several settings then proceeded to make a few minor tweaks. Then it was off the race, or rather off to the recording track.
Watch the video and find out what setting we used on my K4 EQ to get one extremely awesome sound for the acoustic guitars on “Till We Meet Again”. Yes, in the final mix down of the song I did use a combination of the K4 direct sound mixed with the KM184 Sennheiser microphones. Definitely a very awesome addition to the sound of great acoustic guitar recording.
Till We Meet Again K4 Setup
Transcript:
The whole concept of, what did I use for this recording? For Taylor Guitars website.
Right now we’re about to set up the sound for the direct sound coming out of the 615 that I’m going to record for “Till We Meet Again” into the infamous Taylor Guitars K4 equalizer.
And Robert and I, who is currently the owner of RA Audio, are about to set all of this up. He’s waving at you. And, get the sound happening. And then we’re recording through a couple of nice Sennheiser KM184’s that… [you’re welcome]
Thank you.
That I got for Robert. Uhm. So yeah, we’re about to do some pre-production on getting the right sound. Then we’re gonna do a track.
So let’s get started.
One second he says.
Wish I had a remote. Tink. Tink.
Ok, should I bring some treble down and the bass up?
That’s sorta nice? Well, I don’t want sorta. I want bad ass nice.
Back off a little on the bass. Ok, this is half of what the bass was when I raised it. So that’s a nice direct tone? Wow! No mid or anything huh?
Interesting.
So for all those out there in Taylor land who want to know the K4 setting that I just used. We’re probably talking 12:30 on the bass, on the low end. We’re looking at about 11 o’clock on the high. And the mids? Nada. Zero. Center all the way. The volume is set at medium, like right at whatever 12 o’clock is.
So the K4 is set, for the 615ce.
Aw, I’m getting a little choked up. I’m getting featured on Taylor Guitar’s website. This is actually pretty cool. I was asked by Taylor Guitars if I would do a little clip about how I got a particular guitar sound for the trailer Goats. Well, here it is in all it’s glory.
The bonus is, I’ve been asked to do more of them. So stay tuned. As I complete projects that utilize my favorite acoustic guitars (Taylor Guitars ahem hem). Then there will be more of them.
Enjoy
p.s. – There’ll likely be an update before long when Dean Markley also ends up posting this.